Specific Guidelines On How To Install Your Triguard Car Cover
Coverking`s Triguard car cover is meant to be installed over a clean and tidy vehicle only. Therefore, before moving ahead to cover your car with Triguard car cover, you should ensure that the body of your car is completely free from dirt and dust particles. But if specks of dust are attached to the body of your car, you should remove them completely before installing your Triguard car cover on top of the vehicle. You can use Coverking`s silk duster for effective cleansing of your car body. For more information on Coverking`s silk duster, please contact your retailer.
After removing dirt and dust from your vehicle body, you can easily place the Triguard car cover over your car. But if your Triguard cover has mirror pockets you need to install them first before starting the installation of the cover. Install the mirror pockets by gently placing them over the front and back ends of your car, at their fixed positions.
Take adequate care to keep your Triguard cover at a distance from your car exhaust tips if they are extremely hot or if they are sharp-edged. This is essential for the successful installation of your car cover as on touching hot or sharp-edged exhaust tips, your Triguard car cover is likely to melt instantly.
If your car is equipped with a fixed-position antenna, you may need to cut a small portion of your Triguard car cover for successful installation. To achieve this, you need to take away the antenna in the first place and position the car cover on top of your vehicle. Now, find out the bottom of the antenna and cut a small opening in your Triguard car cover at the position where the antenna touches its bottom. In the next step, take away the Triguard car cover and install the antenna. Finally, place the Triguard car cover all over your vehicle and please don’t forget to cover the antenna pieces.
Guidelines For The Installation Of Your Triguard Car Cover Lock Kit
While purchasing your Triguard car cover, it is essential to buy a lock kit as the lock kit proves to be duly effective in preventing the theft of your car cover. However, after buying the lock kit, you can install it easily by following the installation steps briefed below:
- Your Triguard car cover lock kit is equipped with a vinyl coated cable and this cable has a metal piece attached to it at one end. However, there is a loop fixed to the other end of the cable. Start the installation process by reaching the passenger’s corner of the car. Thereafter, insert the loop end of the cable for around two inches via the grommet.
- Now push the other end of the cable below the grommet via the loop of the first end and under the vehicle to the driver’s corner. Next, after reaching the driver’s seat, shove the cable from the external cover and then insert it for around two inches through the grommet.
- In the final step, just lock the end pieces of the cable to its body.