• Coverking`s Spacer Mesh car seat covers are made of three layers. These are namely, the top Nylon layer, the 4mm FMVSS foam layer in the middle and the bottom layer made of Nylon lining.  

• The Spacer Mesh fabric is a high quality upholstery fabric that exhibits a three-dimensional appearance. The seat covers add a significant amount of comfort to your car seats and the three-dimensional structure makes the fabric highly thick without being dense.

• Highly breathable custom seat covers. The superior breathability of the Spacer Mesh fabric permits heat as well as moisture to escape from getting stuck inside the seat cover which further makes your car seats highly comfortable to sit on.

• Spacer Mesh seat covers are available for you in a range of colors, namely, black-gray, black, black-taupe, black-red and black-blue.

• Once you order Spacer Mesh seat covers from Coverking, you would get excellent seat covers equipped with all functionalities such as armrests, headrests, map pockets, airbag flaps, cut-outs for controls, console covers et al.

• Custom-made seat covers that are excellent for indoor use.
• Display good dirt and dust proof properties.
• Considered as better seat covers for their good breathability feature.
• Show better degree of heat insulation properties.
• Provide pleasant soft touch feel.
• Do not emit volatile particles.
• Never undergo any damage due to air pollution.
• Release suitable odors only.
• Warranted for one year.
• Can be dried completely through hand washing or dry cleaning.
• Consume less dry time.
• Possess fair amount of water shedding and water repelling properties.
• Show fair water resistance properties.
• Durability of these seat covers is considerably better.
• Considerably strong seat covers.
• Exhibit better degree of mildew resistance and rot resistance properties.
• Coverking`s Spacer Mesh seat covers are available in small and light packs.
• Can be stored comfortably in a medium storage space.

Installation Guide For Spacer Mesh Backrest Seat Cover

Spacer Mesh backrest seat cover can be easily installed around bucket seats with non-removable headrest by following these installation steps:

• Start off the installation process by bending the seatback in the forward direction. Next, move ahead and drape the Spacer Mesh backrest seat cover around the original car seat.

However, for the installation of Spacer Mesh backrest seat cover around certain other seats; you would need to adopt a couple of extra installation measures. First, fold the seatback forward and then place the backrest cover around the backrest. Then, insert the flap via the separation between the seatback and the seat bottom. Finally, fix Velcro to the flap.

• For successful installation of Spacer Mesh backrest seat cover around bucket seats with integrated seatbelts, simply cover the backrest with the backrest seat cover in the first place. Next, bend the seatback in the forward direction and then insert the flap via the opening between the seatback and the seat bottom. Now, fix the Velcro fastener to complete the installation process.
• You can easily install your Spacer Mesh backrest cover around high-back bucket seats by following a few installation measures. First of all, drape the backrest with the backrest cover. Now bend the seatback in the forward direction and then insert the flap via the opening induced between the seat back and seat bottom. Finally, finish off with the installation by fixing the Velcro fastener.
• To install your backrest seat cover around 60/40 split bench seats, remove the headrest in the first place. Then wrap the backrest with the backrest seat cover. Now insert the flap via the separation between the seat back and the seat bottom but before that bend the seatback forward so that it becomes convenient for you to pass the flap through. Finally affix the Velcro fastener.
• Coverking`s Spacer Mesh backrest seat cover can be easily installed over older jeeps just by bending the seat forward and then by draping the backrest cover around the backrest.

Installation Guide For Spacer Mesh Seat Bottom Cover 

To begin with, wrap the seat bottom with the seat bottom cover. Next, fold the seatback in the forward direction and then insert the flap via the opening between seat back and the seat bottom. Now, fix buckles and hooks and thereafter tuck the extra seat cover material behind the plastics.

Installation Guide For Spacer Mesh Solid Bench Seat Cover

Kick-start the installation process by placing the backrest cover on top of the backrest. However, if your solid bench seat has a headrest, you should take away the headrest before initiating the installation off your Spacer Mesh solid bench seat cover. If your solid bench seat is equipped with a folding armrest, you would need to place the backrest seat cover in the top position above the armrest.

Next, insert the flap through the separation between the seatback and the seat bottom. Thereafter, position the seat bottom cover over the seat bottom and fix the straps properly.

Installation Guide For Spacer Mesh Console Cover 

This installation process involves the following steps.

Begin the installation of your Spacer Mesh Console cover by opening the console. Next, wrap the console top as well as the console bottom. Now you need to insert the flap via the gap between the console top and the console bottom. Finally, fix the Velcro fastener to ensure successful completion of the installation process.

Other Specific Details On Spacer Mesh Seat Cover Installation     

You need to follow special seat cover installation guidelines to install your Spacer Mesh seat cover around car seats having airbags, armrests and lumbar supports. These special installation instructions are mentioned below:

• You should only use your Spacer Mesh custom seat cover equipped with opening flaps to wrap over seats having integrated seat airbags. The flap is to be positioned inside the cut-out and you should be able to open it freely in case of use.

However, if there are seat mounted airbags in your car , ensure that your Spacer Mesh seat covers have airbag cut-outs or flaps to cover these seat airbags. You should not wrap these seat airbags straightway with the body of your spacer mesh seat cover. 

• You would definitely require affixing a Velcro fastener for successful installation of your Spacer Mesh armrest cover.
• To adjust your Spacer Mesh seat cover with some levels or controls in your car, you may need to induce a small opening in the seat cover.

Particular Cleaning Instructions For Your Spacer Mesh Seat Cover

For thorough cleansing of your Spacer Mesh custom seat cover, you need to follow these cleaning procedures:

The hand washing process is used to clean Spacer Mesh seat covers that are not completely covered with dirt or dust. However, the other cleaning process i.e. machine cleaning is used to cleanse Spacer Mesh seat covers that are thoroughly dirt or dust ridden. For machine cleaning, you need to procure large automatic speed control washers (M/Cs) that are obtainable from all types of industrial laundries. You should not use small-sized automatic speed control washers for cleansing your Spacer Mesh seat covers as the comparatively small washing space is smaller M/Cs may hinder the fabric movement of your cover. Also, it is strictly recommended that you should not use agitators in machine cleaning as agitators are likely to destroy your fabric material partially or completely.

Start The Cleaning Of Your Spacer Mesh Seat Covers By Getting Hold Of An Eco-Friendly Anionic Laundry Detergent

Initiate the cleansing of your Spacer Mesh car seat covers by procuring a non-toxic, environmental-friendly, bio-degradable and non-caustic liquid anionic laundry detergent. In the next step, dip two cups of this detergent in cold or warm water. Next, you need to immerse the spacer mesh car seat cover in this mixture for about five minutes. 

Now, wash the Spacer Mesh car seat cover for five minutes with gentle cycles and then again launder the Spacer Mesh seat cover with two cycles. Thereafter, wash the Spacer Mesh car seat cover with one cycle and make it half dry. Finally, dry the seat cover completely in normal environment.

Important Note

• The successful cleansing of your Spacer Mesh car seat cover is possible at only 20-27 degree centigrade temperature.
• The afore-mentioned cleansing process efficiently safeguards the fabric material of your Spacer Mesh car seat cover.
   

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file