Specific Guidelines For The Installation Of Your Mosom Plus Car Cover
For successful installation of your Mosom Plus car cover, you need to follow a couple of pre-installation measures. First, clean the body of your car properly if dirt and dust particles are scattered over it. This is essential because if you use your Mosom Plus car cover to drape a dirty vehicle, the dust elements would get stuck to the body of your car cover. However, to clean your Mosom Plus car cover properly, you can use Coverking`s silk duster which is equipped with 100% silk strands. For more information on Coverking`s silk duster, please contact your retailer.
Secondly, please bear in mind that you should never cover a wet vehicle with your Mosom Plus car cover.
Step-By-Step Instructions On How To Install Your Mosom Plus Car Cover
To begin with, unroll your Mosom Plus car cover and place it over the hood of your vehicle. Thereafter, unfold the car cover towards the back end and place it over the vehicle in such a manner that it covers almost all portions of your car. However, if your vehicle has mirror pockets, you need to install them in the first place by positioning them at their respective positions over the front and back ends.
Important Measures To Be Undertaken During The Installation Of Your Mosom Plus Car Cover
- If your vehicle has sharp-edged or extremely hot exhaust tips, you should maintain adequate caution to prevent your Mosom Plus car cover from touching these exhaust tips. This is because as soon as your Mosom car cover comes in contact with these exhaust tips, it is likely to melt instantly.
- To successfully install your Mosom plus car cover over a fixed-position antenna, you need to cut a little portion of your car cover. First, take away the antenna and cover the vehicle with your Mosom Plus car cover. Now, identify the base of the antenna and cut the Mosom Plus car cover a little at the position where the antenna touches the base. After that, remove the Mosom Plus car cover and install the antenna. Finally, place the cover all over the vehicle and while wrapping the car with your Mosom Plus car cover, don’t forget to cover the antenna patches.
Step-By-Step Instructions On How To Install Your Mosom Plus Car Cover Lock Kit
Purchasing a lock kit along with your Mosom Plus car cover helps preventing the theft of your car cover. However, after buying the lock kit, you should install it properly to ensure adequate security of your car. For successful installation of your Mosom Plus car cover lock kit, just follow the installation steps mentioned below:
- Your Mosom Plus car cover lock kit has a vinyl-coated cable. A metal piece is fixed to the one end of this cable and a loop is attached to its other end. Now, reach the passenger’s corner of the covered vehicle and insert the loop end of the cable for around two inches through the grommet.
- In the second step, push the other end of the cable through under the grommet, via the loop of the first end and under the vehicle to the driver’s corner. After reaching the driver’s side, the next thing you need to do is to pull the cable from the external side of the car cover and insert it for around two inches through the grommet.
- Finally, complete the installation process by locking the end pieces to the body of the cable.