Leatherette seat covers are comprised of three exclusive layers. These are particularly, the top vinyl material layer, the middle 4 mm high density FMVSS foam layer and the bottom layer made of polyester trickle.
Gives the look and feel of genuine leather to your car seats.
Coverking`s leatherette seat covers can easily resist any kind of damage inflicted by kids and pets.
Possess higher breathability and water resistance like genuine leather.
Coverking`s leatherette seat covers are available with exclusive seat features such as armrests, headrests, airbag flaps, cut outs for controls, map pockets, console covers et al at no extra expenditure.
Can be cleaned and installed easily.
Leatherette seat covers are made available in a range of different colors.
Installation Guide For Leatherette Backrest Seat Cover
Wrap the backrest with the backrest seat cover in the first place. Thereafter, pass the flap through the opening between the seatback and the seat bottom but before doing that don’t forget to bend the seatback in the forward direction. Next, affix the Velcro fastener.
Installation Guide For Leatherette Seat Bottom Cover
First, cover the seat bottom with the seat bottom cover. Next, insert the flap through the opening between the seat back and seat bottom. Now, fix the buckles and hooks thereafter hide the extra seat cover material behind the plastic pieces.
Installation Guide For Leatherette Solid Bench Seat Cover
Kick start the installation process by covering the backrest with the backrest seat cover. However, if headrests are attached to your car seats, you need to remove them properly before starting the installation process. But if your car seats have folding armrests, you need to place the backrest seat cover over the armrest.
Next, fold the seatback forward and thereafter gently insert the flap through the opening between the seat back and the seat bottom. Now, cover the seat bottom with the seat bottom cover and fix the straps properly.
Installation Guide For Leatherette Console Cover
For successful installation of your Leatherette console cover, just open the console in the first place. Thereafter, move ahead to cover the console top as well as the console bottom. Now, insert the console bottom flap via the opening between the console top and the console bottom. After that, fix the Velcro fastener and end the installation process.
Other Specific Details On Leatherette Seat Cover Installation
To install your leatherette seat cover over seats equipped with seat airbags, lumbar supports and armrests, you need to follow a couple of additional installation steps. These are especially mentioned below:
Start The Cleaning Of Your Leatherette Seat Covers By Obtaining A Non-Toxic And Eco-Friendly Anionic Laundry Detergent
To clean your leatherette seat covers thoroughly, you need to get hold of a non-toxic, non-caustic, environmental-friendly, bio-degradable liquid anionic laundry detergent. Further, for successful cleaning of your leatherette seat cover, you should use a high suction vacuum cleaner.
Kick-start the cleaning process by treating your leatherette seat cover with the high suction vacuum cleaner and thereafter use a wet tissue to clean the seat cover. Now duck the leatherette seat cover on the green water-based anionic laundry detergent and then wash it properly with a wet tissue. Now use a dry tissue to wash the seat cover. Next, dry the seat cover completely by forcing air outside the vacuum cleaner.
You can view the technical specification of Seat Diagrams
Click on following link to View or Download the Seat Diagram
View Seat Diagram
Download Seat Diagram PDF file