• Coverbond-4 car covers are comprised of four layers: the top Polyester Spun Bond layer, the upper middle Polypropylene Spunbond layer, the lower middle meltblown layer and the bottom Polypropylene Spunbond layer. These four layers of Coverbond-4 car covers provide extra thick protection to your car and the protection also includes safeguard from pets, children, light hail and similar other hazards.

• The melt blown layer offers powerful resistance to dust and dirt.   

• Coverbond-4 is a bulky car cover and it offers effective protection to your car against severe weather conditions.

• Coverking`s Coverbond-4 car cover is made by using UV inhibitors and therefore provides effective protection to your vehicle against the sun’s ultraviolet effect. 

• This car cover is excellent for cars that are frequently exposed to pets, children and light hail.

• The Coverbond-4 car cover gently caresses your vehicle’s paint finish.

• Custom-fit car cover for outdoor protection of your vehicle. 
• Coverbond-4 car cover offers good all weather protection.
• Capacity to resist dirt and dust is quite better than other car covers.
• Eco-friendly and especially suitable for human skin.
• Releases suitable odors.
• The handling of your Coverbond-4 car cover in wind is relatively good.
• Not affected by air pollution.
• Never emit volatile particles.
• Offers good quality scratchless ding protection to your vehicle.
• Provides better protection from pets and children.
• The soft inner fabric material gently touches your vehicle’s paint finish. 
• Exhibit better heat insulation properties.
• Display better breathability.
• Safeguards your vehicle in a better way from bird droppings and tree sap.
• Render better quality protection from the sun’s UV rays.
• Provides good protection from industrial falls and acid rains.
• Resists rain and snow in a better way.
• Offers better quality all weather protection.
• Available for you in small and light packs.
• Require medium space for proper storage.
• Renders good protection against harsh weather and harsh sun.
• Exhibits good mildew and rot resistance properties.
• Care washing is possible through the hand washing process.
• Can be successfully dried by air. 
• Drying time is comparatively less.
• Sheds water in a better way.
• Possesses good water repellent properties.
• Strength is relatively better.
• Displays better durability.
• Available in a range of different colors.

Guidelines For The Installation Of Your Coverbond-4 Car Cover 

• Before starting the installation of your Coverbond-4 car cover, you should make sure that the vehicle on which you are going to wrap the Coverbond-4 car cover is completely free from dust particles. If dirt particles are attached to your car body and you place your Coverbond-4 car over it, the dirt and dust particles would penetrate into the clear fabric of your car cover. You can use Coverking`s silk duster to cleanse your vehicle body before placing Coverbond-4 car cover over it.
• After cleaning the body of your car, start the installation procedure by unrolling the Coverbond-4 car cover and placing it over the bonnet. Now, take care to unfold the car cover properly so that it covers almost all portions of your car. But if your Coverbond-4 car cover has mirror pockets, you should install these mirror pockets in the first place. You can easily install the mirror pockets by fixing them at their respective positions over the front and back ends. As you finish installing the mirror pockets, just drape the Coverbond-4 car cover all over your vehicle.

Important Note

• If your car has extremely hot or sharp-edged exhaust tips, never cover these exhaust tips with your Coverbond-4 car cover because if your car cover touches these tips, it is likely to melt instantly.
• You may need to cut a small portion of your Coverbond-4 car cover to install it successfully over a vehicle having a fixed-position antenna. For this purpose, take away the fixed position antenna and then position the Coverbond-4 car cover on top of the vehicle. Now find out the base of the antenna and cut a little portion of the Coverbond-4 car cover at the position where the antenna comes in contact with the base. Next, you need to remove your Coverbond-4 car cover and install the antenna. Finally, drape the Coverbond-4 car cover all over your vehicle body, including the antenna pieces. 

Instructions On How To Install Your Coverbond-4 Car Cover Lock Kit 

While purchasing your coverbond-4 car cover, you should never forget to buy a lock kit along with it as the lock kit successfully prevents the theft of your car cover. However, for the lock kit to provide adequate protection, you need to install it successfully. To ensure successful installation of your Coverbond-4 car cover lock kit, just follow the installation steps mentioned below:

• Your coverbond-4 car cover lock kit has a vinyl-coated cable. This cable has a metal piece fixed to one end and it also has a loop on the other end.  To start with, move to the passenger’s corner of the vehicle and insert the loop of the cable for around two inches via the grommet.
• In the second step, push the other end of the cable through under the grommet, via the loop of the first end and under the vehicle to the driver’s corner.
• Now, after reaching the driver’s corner, pull the cable from the external side of the cover and insert it for around two inches through the grommet.
• Finally, lock the end pieces of the cable to its body.

Specific Instructions On How To Cleanse Your Coverbond-4 Car Cover

• The two principal procedures used for cleaning your Coverbond-4 car cover are namely, hand washing and machine cleaning. The hand washing process is used to cleanse Coverbond-4 car covers that are not covered with dirt and dust particles to a larger extent. However, the machine cleaning procedure is generally undertaken to clean coverbond-4 car covers that contain specks of dust and dirt to a larger extent. For machine cleaning, you need to get hold of large automatic speed control washers (M/Cs) that can be obtained from laundries meant for commercial purposes. It is altogether recommended that you should not use agitators in the machine cleaning of your Coverbond-4 car covers as the usage of agitators is likely to damage the fabric of the cover.
• Successful cleaning of your Coverbond-4 car cover is also possible by bringing out the inner portion of the car cover and then by spraying water all over it with the help of a hose.

Your Coverbond-4 Car Cover Cleaning Procedure: A Glance

• To start with, obtain a non-caustic, non-toxic, environmentally-friendly and bio-degradable anionic laundry detergent.
• Secondly, mix two cups of this laundry detergent in warm or cold water and then stir the mixture.
• Now, immerse the Coverbond-4 car cover in this mixture and let the car cover remain there for a period of five minutes.
• In the fourth step, you need to clean the car cover for about five minutes with gentle cycles.
• Now, undertake a two cycle washing of the Coverbond-4 car cover and then half-dry the car cover by cleaning it with one cycle.
• Finally, take the half-dried car cover and lay it over the vehicle. After a certain amount of time, your Coverbond-4 car cover would dry automatically by the influence of air.