• Ballistic seat covers are Coverking`s toughest custom seat covers. Made of ballistic material which is extremely tough and remain undamaged even after coming in contact with riveted jeans.

• The ballistic material has an inner water proof coating that prevents spilt water, milk et al from damaging the seat cover fabric. 

• Coverking`s Ballistic seat covers possess UV ingredients and thus they are well-protected from the possible damage due to uv rays.

• Excellent seat covers for indoor use and are considered better and more effective than other seat covers.

• Exhibit better dirt and dust proof properties.
• Mildew and rot resistance is better and also display better abrasion resistance properties.
• Known for better breathability.
• Extremely soft to touch.
• Possess better heat insulation properties.
• Ballistic seat covers are environmental-friendly and highly suitable for human skin. 
• Offer a better degree of protection from the potential damage caused by pets and children.
• Never emit volatiles and are not affected by air pollution.
• Show a better degree of color fastness when subjected to laundering and crocking.
• Display better abrasion resistance properties. 
• Mildew as well as rot resistance capacity is better.
• Coverking`s ballistic seat covers are available in small and light packs.
• Require medium space for storage.
• Resistance to seam slippage is significantly better.
• Ballistic seat covers are highly durable seat covers. 
• Exceptionally strong seat covers.
• Better seat covers for their water repellent properties.
• Demonstrate better stability in dry cleaning and take less dry time.
• Care washing is undertaken through hand washing or dry cleaning.

Installation Guide For Ballistic Backrest Seat Cover

• In order to install Ballistic backrest seat cover around bucket seats equipped with non-removable headrest, just push the seat and bend it forward. Then easily place the Ballistic backrest seat cover over the original car seat. But for installation of Ballistic backrest seat cover around certain other seats; you are required to pass the flap via the opening between the seat back and the seat bottom. In the second step, affix the Velcro fastener and then place the Ballistic backrest seat cover around the original car seat.   
• To install Coverking`s Ballistic backrest seat cover over 60/40 split bench seats, you need to remove the headrest first. Then bend the seatback forward as you pass the flap via the separation between seatback and the seat bottom. In the third step, affix the Velcro fastener and then wrap the ballistic backrest seat cover around the original car seat.
• For successful installation of ballistic backrest seat cover over older jeep models, you need to bend the seatback forward and then you can effortlessly wrap the Ballistic backrest seat cover around the original car seat.

Installation Guide For Ballistic Seat Bottom Cover 

The successful installation of your Ballistic seat bottom cover involves the following steps. Bend the seat in the forward direction and then drape the original car seat with the Ballistic seat bottom cover. Next, tuck the flap through the fixed fasteners and hooks. Now hide the exposed Ballistic seat bottom cover material behind the plastic pieces.   

Installation Guide For Ballistic Solid Bench Seat Cover 

For successful installation of Ballistic solid bench seat cover, bend the seatback in the first place and thereafter place the backrest seat cover around the backrest. But if there is an armrest attached, you need to place the backrest seat cover in the top high position just above the armrest. Now if your car seat is equipped with a headrest, take away the headrest first and thereafter wrap the Ballistic solid bench seat cover over the original car seat. Finally, insert the flap via the opening between the seat back and the seat bottom. Thereafter position the seat bottom cover around the seat bottom and fasten the straps properly.  

Installation Guide For Ballistic Console Cover

To install ballistic console cover properly, just follow these steps. Open the console in the first place. Then wrap the console top and the console bottom. In the third step, fix the flap through the separation between the console top and the console bottom. Finally, go ahead and attach the Velcro fastener.

Other Specific Details On Ballistic Seat Cover Installation

• During the installation of Ballistic seat cover, it is to be kept in mind that if your car is equipped with seat mounted airbags, you should never cover these airbags with the body of your Ballistic seat cover. Instead, your seat cover should possess flaps or airbag cut-outs to cover the seat airbags.
• Only Ballistic seat covers having opening flaps are to be used to cover seats having integrated seat airbags. The flap is fixed inside the cut out and is designed in a way that it can be opened freely during use.
• During the installation of your Ballistic seat cover, you may need to create a small opening in it to adjust with some controls or levers of your car.
• For successful installation of our Ballistic armrest cover, you would need to fix a Velcro fastener.

Details On Cleaning Instructions 

You can clean your Ballistic seat covers effectively through two specific procedures. These are particularly, machine cleaning and hand washing process. The machine cleaning process can be effectively undertaken with the help of automatic speed control washers (M/Cs). However, during the machine cleaning of your Ballistic seat covers, you should never apply agitators as the usage of agitators can damage your Ballistic seat cover fabric. The other procedure hand washing is a really simple process and involves cleaning the Ballistic seat cover with your hands.

Successful cleansing of your ballistic seat cover is possible only at 20-27 degree centigrade. For thorough cleaning of your Ballistic seat cover, just follow these steps properly. First of all, obtain a non-toxic, environmental-friendly, bio-degradable, non-caustic and liquid anionic laundry detergent. Thereafter, take two cups of this detergent and stir in cold/warm water. Next, immerse the ballistic seat cover in this mixture for a period of 5 minutes to release the dust particles stuck to the seat cover.

Now wipe your Ballistic seat cover for a period of five minutes with gentle cycles. Then immerse the seat cover in cold water and after that rinse it completely with two cycles. Thereafter, rinse it again with one cycle and make the seat cover half dry. Finally, flat dry your Ballistic seat cover in normal environment.

Just follow these step-by-step instructions for cleaning your Ballistic seat cover and safeguard the finishing treatment on your seat cover fabric.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file