Autobody armor car covers are excellent car covers for outdoor use.
Coverking`s Autobody Armor car covers are comprised of three layers: a warp knitted polyester layer covers the top, the middle layer is a thermoplastic polyurethane film layer and the bottom layer is made up of a polyester felt layer. These three layers resist snow, rain, industrial falls or acid rain in the best possible way and provide excellent protection to your car.
The Autobody Armor fabric is extremely strong and is also naturally resistant to the sun`s UV rays. Because of this, the Autobody Armor car covers are extensively used in sun-hit areas like Arizona where the UV rays are known to damage vehicle interiors and paint finish to a significant extent.
The extremely high breathability prevents moisture from getting trapped inside the car cover.
The soft inner fabric of your Autobody Armor car cover gently caresses your vehicle’s water-based paint finish.
Available for you with a four year warranty.
Installation Guide For Your Autobody Armor Car Cover
You need to adopt a couple of precautionary measures before moving ahead to install your Autobody Armor car cover. These safety measures are particularly detailed below:
Autobody Armor Car Cover Installation Process
Start off the installation by unrolling the Autobody Armor car cover over the hood of your vehicle. Now unfold the car cover properly to cover almost all portions of your vehicle. However, if there are mirror pockets attached to your car then first, install your Autobody Armor car cover over these mirror pockets. This would prevent the car cover from being blown away by strong winds. Thereafter, you can easily wrap the entire vehicle with your Autobody Armor car cover.
Tips For Installing Your Autobody Armor Car Cover Lock Kit
While purchasing your Autobody Armor car cover, if you buy the lock kit it would definitely be a clever investment as the lock kit would play a pivotal role in preventing the theft of your car cover.
Your Autobody Armor car cover lock kit has a vinyl coated cable with a metal piece attached to one end, a loop is fixed to the other end of your vinyl-coated cable. The installation of your Autobody Armor car cover lock kit involves the following steps:
To begin with, move ahead to the passenger’s corner of your covered car and thereafter insert the loop end of the cable for around two inches via the grommet. Now push the other end of the cable via the loop of the first end and under the grommet to the driver’s seat. After reaching the driver’s corner, you need to pull the cable from the outside of the cover and insert it two inches via the grommet. Finally, complete the installation process by locking the end pieces to your cable body.
Guidelines For Cleansing Your Autobody Armor Car Cover
For thorough cleaning of your Autobody Armor car cover, you can either use the machine cleaning procedure or hand washing which involves the use of both the hands.
The machine cleaning process is used to clean those Autobody Armor car covers that are covered with dirt and dust to a significant extent. However, for machine cleaning, you need to procure large-sized automatic speed control washers (M/Cs). Small-sized M/Cs won’t be suitable for cleansing your Autobody Armor car covers as the small washing space in smaller M/Cs may hinder the movement of your car cover fabric. It is recommended not to use agitators in machine cleaning as the usage of agitators may cause damage to your car cover.
The other cleaning process is hand washing and is used to clean Autobody Armor car covers that are not very dirty.
There is another procedure to clean your Autobody Armor car cover and according to this cleaning process, you need to place the car cover on top of your vehicle body with the inner cover stretched out. Now, clean the car cover by splashing water with the help of a hose. It is important to note that you can opt for this cleaning only if there is no external antenna fixed to your car.
Autobody Armor Car Cover Cleaning Process
In the first place, get hold of a non-toxic, non-caustic, eco-friendly, bio-degradable and anionic laundry detergent. Now, mix two cups of this detergent in warm or cold water and then immerse your Autobody Armor car cover in this mixture for around five minutes. Next, rinse the car cover with gentle cycles for around five minutes. Now, start washing the Autobody Armor car cover with two cycles in cold water. After that, make the car cover half dry by rinsing it properly with one cycle.
After half drying the cover in this manner, gently spread it over the vehicle and it would dry up completely via the effect of air.