Installation Guide For Your Stormproof Car Cover
Before installing Coverking`s Stormproof car cover on top of your vehicle body, you need to adopt a few safety measures. First of all, you should ensure that body of your car is completely free of dirt and dust particles. If you wrap your car cover around a dirt-ridden vehicle; you would damage the finish of your car cover by attracting the dust particles. Therefore, you are strictly recommended not to cover a dirty vehicle.
With the help of Coverking silk duster, you can clean your dust-ridden vehicle and thereafter you can easily wrap the Stormproofcar cover around the vehicle body.
Kindly note that you should never wrap a wet vehicle with your Stormproof car cover.
The Definite Process Of Installing Your Stormproof Car Cover
You can successfully install your Stormproof car cover by following the installation steps described below.
To begin with, unroll your Stormproof car cover and place it over your vehicle body. After laying the cover over the hood of the vehicle, you need to unfold it properly so that it covers maximum portions of your vehicle body.
Next, install the mirror pockets if there are mirror pockets attached to your car cover. The installation of the mirror pockets helps to keep your Stormproof car cover fixed to its position during windy environment. Thereafter, you can easily wrap the front and rear ends of your car with the Stormproof car cover.
Important Guidelines
- During the installation of your Stormproof car cover, you should take special care to keep the car cover away from sharp-edged exhaust tips of your car. This is to avoid any kind of damage to your car cover material because the car cover can melt if it touches the hot exhaust tips.
- During the installation of your Stormproof car cover, you may need to initiate an opening in the car cover material to install it successfully over vehicle having a fixed-position antenna. To make the opening in your Stormproof car cover, take away the antenna in the first place and then position the Stormproof car cover on top of your car. Now, you need to cut a little bit of the car cover material at the position where the antenna of the car and its base come together. Next, take the car cover away and install the antenna. Now, you can wrap the Stormproof car cover all over the vehicle, including the antenna patches.
Tips To Install Your Stormproof Car Cover Lock Kit
Purchasing a lock kit along with your Stormproof car cover is definitely a sensible investment as the lock kit would safeguard your car cover from being stolen.
Your Stormproof car cover lock kit is equipped with a vinyl coated cable. A metal piece is attached to one end of this cable and the other end carries a loop. Now, move ahead to the passenger’s corner of the vehicle and fix the loop end of the cable at around two inches via the grommet. Next, pull the other end of the cable through under the grommet via the loop of the first end and under the vehicle towards the driver’s seat. After reaching the driver’s seat, you need to push the cable from the outside of the cover and insert it two inches via the grommet. Thereafter, you can easily complete the installation by locking the end pieces to the cable body.